SD6X

Our Big Bad Boy for Large Areas!

$2,995 $2,495

The SD6X fan is built for huge areas that need massive, all-you-got airflow. With a totally-enclosed 2.0 HP Heavy Industry inverter motor and a wall mounted controller to control the power and the speed, she gets the job done, and is built to last a long time in extreme conditions. The variable speed feature allows you to adjust the airflow for different seasons, including winter when you can run it on a slow setting to simply destratify the warmer air from the ceiling and also minimize floor sweating. Needs to hang at least 10’ from the floor, and at least 3’ from the ceiling. The ideal hanging height is about 18 to 30 feet high, which gives a nice breeze over a large floor area. This bulletproof setup of the Leeson Inverter Motor and the KB Electronics Controller can handle extreme ambient heat up to 135 degrees F, and because the controller actually converts the input power to 3 phase 220 voltage it is highly efficient at only 5.8 amps. For production lines, hang this fan in series at about a 30 degree angle to blow from a fresh air source at one end to the exhaust end at the other, with each fan about 60 feet apart, and your workers will put your picture right next to the kids on their fireplace mantel. Beg, Borrow, or Steal to get the extra $500 for this model and you will not regret it.

Visa MasterCard Amex Discover

Perfect for:

  • Livestock Barns
  • Auditoriums
  • Airport Terminals
  • School Gyms
  • Airplane Hangars
  • Performance Stages
  • Parking Garages
  • Warehouses
  • Medium to Large Sheds
  • Malls
  • Fitness Gyms
  • Large Restaurant Patios
  • Large Garages
  • Resorts
  • Automobile Dealerships
  • Large Shops
  • Barns
  • Auto Repair Shops
  • Church Buildings
  • Manufacturing Shops
  • Arenas
  • Event Centers
  • Aviation
  • Military

Specifications:

Airflow

43,000 CFM

Motor

2.0 HP / Inverter motor / 220 3 phase/ 5.8 Amps / Class F Insulation / Totally Enclosed Heavy Industry Duty / UL

Weight

134 Pounds

Mounting System

Quad strap hanging system. Four 48” straps, 4300 lb. capacity each, 4 eyebolts on fan.

Power Cord

The 110 Volt Input power cord is 15 feet, 3 wire, 16 gauge, SJOOW for weather protection, UL

Blades

6 Krupp Stainless Steel, Polished, balanced, grooved for noise reduction and rigidity

Shroud

Steel formed, powder coated gloss black

Noise Level

43.4 DB (taken 20’ from fan center, hanging 20’ from the floor)

Drive

Belt drive, steel motor pulley

Compliance

Complies with National fire sprinkler codes (less than 60”)

Wiring

This efficient heavy duty setup requires a 14/4 wire to be run from the wall controller up to the fan motor